Is your device supported? Download driver encore n150 adapter windows 7. Before starting with the set up, please make sure that you have one of the devices mentioned in the section. Following are the prerequisites to install WiSense on your Android device: • Any machine (Linux, Mac, Windows) with the Android SDK and tools installed (for adb and fastboot). You can also download (and unzip) Android's adb and fastboot tools from.

This utility significantly speed up installation process of Tp-Link wireless access points. You can finish complete setup (wireless, encryption, lan settings, dhcp. Probable Linux driver ath9k_htc (in backports, open firmware). See TP-LINK TL-WN722N v2. Version 3.x is using Realtek RTL8188EUS chip. It is a rebadged v2.

• Make sure that the USB debug mode on your android device is enabled. Go to Settings > Developer options. Turn on the 'Developer options' toggle button (top right). Also select the 'Android USB debugging' option, if not already done yet. Note: On Android 4.2 and higher, the Developer options screen is hidden by default.

To make it available, go to Settings > 'About phone' and tap Build number seven times. Return to the previous screen to find Developer options.

• [You can skip this step if the device is already unlocked]. Unlock bootloader for installing the WiSense platform on your android device. Instructions are available at the 'Unlocking the bootloader' section. Note that this will void your device warranty. • Any Atheros AR9271 chipset based wireless adapter (e.g., Netgear WNA1100, TP-LINK TL-WN722N etc.) and a USB OTG cable to connect the wireless adapter to your android device.

Check for all supported AR9271 based adapter's. Setup Instructions Following are the guidelines to download and install WiSense on an Android device: Step 1: Install ClockWorkMod (CWM) recovery [Requires unlocked device] You can skip this step if your device already has CWM or another recovery tool installed. The ClockWorkMod recovery firmware provides a very easy way to backup your current system as well as install the WiSense update to the device. • Download the 'Touch Recovery' version of on a machine based on your device type (Galaxy Nexus vs. • Using a terminal, go into the directory containing the Android adb and fastboot tools (downloaded in Step 1). Otherwise, if Android SDK is already installed on your machine, adb and fastboot tools should be in the 'platform-tools' sub-directory of your Android SDK. Connect your Android device to the development machine using a USB cable.

Make sure the 'USB debugging mode' is enabled on your Android device. • Execute './adb reboot-bootloader' on terminal to reboot the device into the bootloader mode.

• Using the fastboot tool, flash ClockWorkMod Recovery onto your device by entering the following command: 'fastboot flash recovery ' where the 'your_recovery_image.img' is the name of the CWM file that you downloaded. • Reboot the android device by choosing the 'Start' option in the bootloader (press the power to select option). Step 2: Download and install the WiSense update image on your device • Download the SuperSU update zip file (for rooting) and correct WiSense update image to your machine based on your device type and OS from. • Connect your Android device to the development machine using a USB cable and copy the WiSense image to your device using './adb push /mnt/sdcard/'. The file transfer may take upto 20 seconds.

• Also push the SuperSU updat using './adb push /mnt/sdcard/'. • After the copy is complete, boot the device into recovery mode by running the following command: './adb reboot-bootloader'. Use the 'Volume Up' button to go to the 'Recovery Mode' option and select it (press power button). Now, you should see a screen similar to the one below: • Recommended: Backup you current system image using CWM by selecting the 'backup and restore' option in the main menu. Press backup option to start the system backup operation (may take upto 10 minutes).

This operation creates a backup of your tablet image on the sdcard. • Go back to the main menu and clear the cache by using the 'wipe cache partition' option. • Now, we are ready to install the WiSense update image. From the main menu, choose 'install zip > choose zip from /sdcard'. Now find the downloaded Wisense update zip file in the menu (file maybe in the '0/' directory) and click the filename to install.